Filter
Top Products
Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional Description
Special functions
Set lineout mode
Set lineout to
variable
55*1# LineOut*X]
Set lineout port mode to variable (X=1,
default).
Set lineout to fixed
55*2# LineOut*X]
Set lineout port mode to fixed (X=2).
View lineout mode
55# LineOut*X]
View lineout port mode (X= 1 or 2).
Set audio output mode
Set audio output
mode to dual mono
18*1# PreAmpMod*X]
Set audio output mode to dual mono
(X=1, default).
Set audio output to
fixed
18*2# PreAmpMod*X]
Set audio output mode to stereo (X=2).
View audio output
mode
18# PreAmpMod*X]
View audio output mode (X= 1 or 2).
Paging sensor hold time
Set paging sensor
hold time
75*x# PageDly*X]
Set paging hold time (x = 0 to 8
seconds) in 1 second steps: default = 3
(enable), 0 = 0 seconds (disabled), 1 =
1.0 second, 2 = 2.0 seconds...8 = 8.0
seconds.
View paging sensor
hold time
75# PageDly*X]
View paging hold time (where x = 0 to 8)
Paging sensor sensitivity
Set paging sensor
sensitivity
83*x# PageSen*X]
Set paging sensitivity (where x = 0 ‑ 100,
50 = default).
View paging sensor
sensitivity
83# PageSen*X]
View paging sensitivity (where x = 0 to
100)
Picture adjustment (PVT SW HDMI RGB D inputs 2 and 4 only)
Set pixel phase value
EX3^*X3&PHAS} PhasX3^*X3&]
Set pixel phase X3& for X3^.
Increment pixel
phase value
EX3^+PHAS} PhasX3^*X3&]
Increase pixel phase to X3& for X3^.
Decrement pixel
phase value
EX3^-PHAS} PhasX3^*X3&]
Decrease pixel phase to X3& for X3^.
View pixel phase
value
EX3^PHAS}
X3&]
View pixel phase X3& for X3^.
Verbose response
PhasX3^*X3&]
Set total pixel value
EX3^*X2@TPIX} TpixX3^*X2@]
Set total pixel X2@ for X3^.
Increment total pixel
value
EX3^+TPIX} TpixX3^*X2@]
Increase total pixel to X2@ for X3^.
Decrement total pixel
value
EX3^-TPIX} TpixX3^*X2@]
Decrease total pixel to X2@ for X3^.
View total pixel value
EX3^TPIX}
X2@]
View total pixel X2@ for X3^.
Verbose response
TpixX3^*X2@]
Set horizontal start
value
EX3^*X3*HSRT} HsrtX3^*X3*]
Set horizontal start at X3* for X3^.
Increment horizontal
start value
EX3^+HSRT} HsrtX3^*X3*]
Increase horizontal start to X3* for X3^.
NOTE: X2@ = Total pixels — ±255 of the default value (depends on input rate)
X3^ = PVT SW HDMI RGB D inputs 2 and 4 only
2 = input 2
4 = input 4
X3& = Pixel phase ‑ 0‑63 (32 = default)
X3* = Horizontal start ‑ 0‑255 (128 = default)
PVS 405D • SIS Communication and Control 27