Extron electronic VSW 2VGA A Switch User Manual


  Open as PDF
of 40
 
VSW 2VGA A • Installation and Operation
Installation and Operation, cont’d
2-18
Tree conguration
In a tree configuration, the output of each VSW 2VGA A
switcher is connected to input 1 or input 2 of the next switcher.
This repetition of one switcher's output to another switcher's
input can be repeated for up to a maximum of 10 switchers in
a daisy chain. The output of the last switcher is connected to a
display.
Source signals are connected to input 1 and input 2 of each VSW
2VGA A switcher at the top of the tree through a VSW I AAP
interface. Select the source by pressing the VSW I AAP's Show
Me button for the corresponding switcher.
• Switcherscanbedaisychainedinthiscongurationupto
ten levels deep without any signal degradation.
• Apowersupplyisrequiredforeachswitcherinthe
chain that has its output connected to input 1 of the next
switcher.
• Sourcescanonlybeselectedandconnectedtothe
switcher through the VSW I AAP interface.
• EachVSWIAAPmustbeconguredforthetree
configuration. See "Using the VSW I AAP" in this chapter
for additional information.
Tree conguration example
The following illustration is a simple example of daisy chaining
using a tree configuration.
 previous next