Filter
Top Products
www.rletech.com 66 970.484.6510
5 EIA-232 Interface
5.3.1 Main Configuration Menu – SC
Typing SC at the command prompt on the Main Menu displays the Main Configuration Menu
that lists all items for system setup and configuration. This menu may be password protected. If
it is, the password must be entered when the SC menu selection is made. To enter the password,
type SC, press the space bar once, and then type the appropriate password.
Table 5.2
Main Configuration Menu (SC) Commands
Command Description Function
1IP
Configuration
Menu
1displays the IP Configuration Menu.
2Factory Menu2displays the Factory Menu. This menu provides a means to
change the MAC address and erase the user configuration
stored in Flash memory. This area is password protected. If
you are familiar with MAC assignments and configuring the
F3400/F1000, contact RLE Technologies for the password
to this menu.
WARNING! Once you receive the password for this menu,
you assume full responsibility for the system configuration
and proper MAC addressing of the F3400/F1000.
3Load/Save
Configuration
Data
3allows user configurations to be saved and reloaded onto
other F3400/F1000s. Windows HyperTerminal application
software may be used to perform the load/save functions.
Before the configuration can be loaded onto other F3400/
F1000s, it must be checked for accuracy. Blank spaces or
unwanted characters, such as the “Press <enter> to
download the file” text, may be saved into the beginning of
the configuration file. Open the file in notepad and examine
the first few lines. Delete any characters that were
accidentally embedded into the file.
4 Configuration
Password
4 allows the user to password protect the configuration
section of the F3400/F1000 Firmware. The password can be
any combination of 7 numbers and/or characters.
xExit x exits the Main Configuration Menu and returns to the Main
Menu.