Filter
Top Products
FS-8700-64 ATMI ACM Page 7 of 22
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
4.4.2 Driver Specific Map Descriptor Parameters
Column Title Function Legal Values
Node_Name Name of Node to fetch data
from
One of the node names
specified in “Client Node
Descriptor” above
Data_Array_Offset Position in the data array to
which data should start being
written.
0, 1 , 2 , 3
Length Length of Map Descriptor. The
length is required to help the
driver validate the CSV file.
Set the length to a multiple of
16. The multiple should be the
maximum area number.
1 – 1280
Address Starting address of read block 0
Driver specific keywords
The following parameters apply only to the AMI ACM driver.
ATMI_Data* Used to specify which
component of the gas data
structure to store.
You will need one map
descriptor for each
component that you are
interested in storing.
See section 6.9 for more
info.
Slot-alarm,
Slot-warning,
Slot-combo
Slot-values
Port-alarm,
Port-warning,
Port-combo
Gas-value, (== Port-values)
Current-Port
Current-Slot
Malfunctions
4.4.3 Timing Parameters
Column Title Function Legal Values
Scan_Interval Rate at which data is polled >0.1s