Filter
Top Products
25
Basic Operation
Basic Operation
• The arrows are white when there is no correction.
• The direction of the arrow being corrected turns red.
• The arrows disappear at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control, correct the image
manually as follows:
Press the KEYSTONE button on the remote control.
The keystone dialog box will appear.
Correct keystone distortion by pressing the Point ed
buttons. Keystone adjustment can be memorized. (p47)
Reduce the upper width
with Point e button.
Reduce the lower width
with Point d button.
Remote Control
Top Control
AUTO SET UP
button
AUTO SET button
O
N
-
OFF
POWER
AUTO SET UP
INPUT
WARNING
LAMP REPLACE
MENU
- VOLUME
+ VOLUME
SELECT
POINT ed buttons
POINT ed buttons
KEYSTONE button
Auto Setup Function
Auto setup function is provided to automatically correct
Keystone distortion according to the projector's tilt and
adjust the computer display parameters (Fine sync, Total
dots and Picture position) by just pressing the AUTO SETUP
button on the top control or the AUTO SET button on the
remote control. The operational setup for the Auto setup
can be changed in the Setting menu.
Refer to p46 on setting of the Auto setup function.
✔Note:.
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is On in the
Setting menu. (p50)
• Perfect correction of the image distortion cannot be ensured with
the Auto setup function. If the distortion cannot be corrected
properly by pressing the AUTO SETUP/ AUTO SET button, adjust
manually by pressing the KEYSTONE button on the remote control
or selecting Keystone in the Setting menu. (p25, 47)
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Lever
Focus Ring
Keystone Correction
Zoom and Focus Adjustment