Filter
Top Products
47
Setting
Display
Press the Point 7 8 buttons to switch On/Off. This function
decides to display On-Screen Displays.
On .........................Show all the On-Screen Displays. Use
this function when you want to project
images after the lamp becomes bright
enough. Factory default setting is this
mode.
Countdown off ......Show the input image instead of the
countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off.........................Do not show On-Screen Displays.
except;
● On-Screen Menu
● “Power off?” message
● P-Timer
● “No signal” message for Power management item (p50)
● ”Please wait...” message
● White arrows for True item in the Screen Menu (p37)
Blue back
Press the Point 7 8 buttons to switch On/Off. When this
function is “On,” a blue image is displayed while the input
signal is not detected.
Keystone
This function corrects distortion of a projected image.
Select either Store or Reset with the Point 7 8 buttons, and
then press the SELECT button. The keystone dialog box
will appear. Correct keystone with the Point ed buttons.
(p25)
Store .........store the keystone correction even when the
AC power cord is unplugged.
Reset ........reset the keystone correction when the AC
power cord is unplugged.
Keystone
Setting