Filter
Top Products
20 01-28008-0018-20050128 Fortinet Inc.
Factory default FortiGate configuration settings Getting started
Factory default NAT/Route mode network configuration
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in Table 3 on page 20. This configuration allows
you to connect to the FortiGate unit web-based manager and establish the
configuration required to connect the FortiGate unit to the network. In Table 3 on
page 20, HTTPS administrative access means you can connect to the web-based
manager using HTTPS protocol through this interface. Ping administrative access
means this interface responds to ping requests.
Table 2: FortiGate DHCP Server default configuration
Name internal_dhcp_server
Interface Internal
Default Gateway 192.168.1.99
IP Range 192.168.1.110 – 192.168.1.210
Network Mask 255.255.255.0
Lease Duration 7 days
DNS Server 1 192.168.1.99
Table 3: Factory default NAT/Route mode network configuration
Administrator
account
User name: admin
Password: (none)
Internal interface
IP: 192.168.1.99
Netmask: 255.255.255.0
Administrative Access: HTTP, HTTPS,
Ping
WAN1 interface
IP: 192.168.100.99
Netmask: 255.255.255.0
Administrative Access: Ping
WAN2 interface
IP: 192.168.101.99
Netmask: 255.255.255.0
Administrative Access: Ping
DMZ interface
IP: 10.10.10.1
Netmask: 255.255.255.0
Administrative Access: HTTPS, Ping
Modem interface
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: