Filter
Top Products
FortiGate-5000 Series Introduction
44 01-30000-83466-20090108
Base backplane gigabit communication FortiGate-5005FA2 security system
• Firewall and intrusion protection (IPS), when there is a reasonable percentage
of P2P packets.
• Firewall, intrusion protection (IPS), and antivirus, when there is a reasonable
percentage of P2P packets.
• Firewall and IPSec VPN applications.
The following traffic scenarios should be handled by the normal (or non-
accelerated) FortiGate-5005FA2 interfaces:
• Session oriented traffic when the session lifetime is very short.
• Firewall and antivirus only applications.
Traffic will not be off-loaded to the FortiGate-5005FA2 accelerator module. The
result will be high CPU usage because of the high CPU requirement for
antivirus scanning.
FA2 interfaces and active-active HA performance
FortiOS v3.0 MR4 firmware can also use FA2 acceleration to improve
active-active HA load balancing performance. See the FortiGate HA Overview or
the FortiGate HA Guide for more information.
Base backplane gigabit communication
The FortiGate-5005FA2 base1 and base2 backplane gigabit interfaces can be
used for HA heartbeat communication between FortiGate-5005FA2 boards
installed in the same or in different FortiGate-5000 chassis. You can also
configure FortiGate-5005FA2 boards to use the base backplane interfaces for
data communication between FortiGate boards. To support base backplane
communications your FortiGate-5140 or FortiGate-5050 chassis must include one
or more FortiSwitch-5003 boards. FortiSwitch-5003 boards are installed in chassis
slots 1 and 2. The FortiGate-5020 chassis supports base backplane
communication with no additions or changes to the chassis.
For information about base backplane communication in FortiGate-5140 and
FortiGate-5050 chassis, see the FortiGate-5000 Base Backplane Communication
Guide. For information about the FortiSwitch-5003 board, see the
FortiSwitch-5003 Guide.
FortiGate-5005-DIST security system
You can install FortiGate-5005FA2 boards as worker boards in a
FortiGate-5005-DIST security system. Worker boards apply FortiGate security
system functionality such as applying firewall policies, virus scanning, IPS and
routing to distributed traffic.
For complete information about the FortiGate-5005-DIST security system and the
role of worker boards, see the FortiGate-5005-DIST Security System
Administration Guide.