Fujitsu BX600 SB9 Switch User Manual


 
White Paper Issue: October 2006 Integration of BX600 SB9 Switches in Cisco Networks Page 18 / 47
switchport mode trunk
channel-group 2 mode on
interface GigabitEthernet0/23
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode on
!
interface GigabitEthernet0/24
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 3 mode on
Step 2: Verify the configuration
! Check if STP is diabled @ SB9
!
(bx6-sb9-a) #show spanning-tree summary
Spanning Tree Adminmode........... Disabled
Spanning Tree Version............. IEEE 802.1d
Configuration Name................ Default
Configuration Revision Level...... 0
Configuration Digest Key.......... 0xac36177f50283cd4b83821d8ab26de62
Configuration Format Selector..... 0
No MST instances to display.
! Check port-channel configuration
(bx6-sb9-a) #show port-channel all
Port- Link
Log. Channel Adm. Trap STP Mbr Port Port
Intf Name Link Mode Mode Mode Type Ports Speed Active
------ --------------- ------ ---- ---- ------ ------- ------ --------- ------
1/1 Po1 Up En. En. En. Static 0/11 Auto True
0/12 Auto True
1/2 Po2 Up En. En. En. Static 0/13 Auto True
0/14 Auto True
! Check the VLAN configuration
(bx6-sb9-a) #show vlan
VLAN ID VLAN Name VLAN Type Interface(s)
------- -------------------------------- ---------- -------------------------
1 Default Default 0/4,0/5,0/6,0/10,0/15,
0/16,1/1,1/2
10 VLAN-10 Static 0/1,0/15,0/16,1/1,1/2
20 VLAN-20 Static 0/2,0/15,0/16,1/1,1/2
(bx6-sb9-a) #
! Check if RSTP state at Cisco Switch A
!
Cisco-A#show spanning-tree
VLAN0001
Spanning tree enabled protocol rstp
Root ID Priority 1
Address 0017.9470.3200
This bridge is the root
Hello Time 1 sec Max Age 11 sec Forward Delay 8 sec
Bridge ID Priority 1 (priority 0 sys-id-ext 1)
Address 0017.9470.3200
Hello Time 1 sec Max Age 11 sec Forward Delay 8 sec
Aging Time 300
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------