Filter
Top Products
White Paper Issue: October 2006 Integration of BX600 SB9 Switches in Cisco Networks Page 7 / 47
channel-group 2 mode on
end
Step 3: Bring up the affected ports
! SB9
interface range 0/11 – 0/14
no shutdown
exit
end
! Cisco A
interface Po 1
no shutdown
end
! Cisco B
interface Po 2
no shutdown
end
Step 4: Verify the operation of the port-channels
! SB9
(SB9) #show port-channel
Logical Interface Port-Channel Name Link State Mbr Ports Active Ports
----------------- ----------------- ---------- ---------- ------------
1/1 Po1 Up 0/11,0/12 0/11,0/12
1/2 Po2 Up 0/13,0/14 0/13,0/14
! Cisco A
Cisco-A#show etherchannel summary
Flags: D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+----------------------------------------------
1 Po1(SU) - Gi0/1(P) Gi0/2(P)
! Cisco B
Cisco-A#show etherchannel summary
Flags: D - down P - in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate aggregator
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+----------------------------------------------
1 Po1(SU) - Gi0/1(P) Gi0/2(P)