Fujitsu BX600 SB9 Switch User Manual


 
White Paper Issue: October 2006 Integration of BX600 SB9 Switches in Cisco Networks Page 23 / 47
0/5 Enabled Disabled Disabled
0/6 Enabled Disabled Disabled
0/7 Enabled Disabled Disabled
0/8 Enabled Disabled Disabled
0/9 Enabled Disabled Disabled
0/10 Enabled Disabled Disabled
0/11 Enabled PC Mbr Manual forwarding Disabled
0/12 Enabled PC Mbr Manual forwarding Disabled
0/13 Enabled PC Mbr Manual forwarding Disabled
0/14 Enabled PC Mbr Manual forwarding Disabled
0/15 Enabled Disabled Disabled
STP STP Port
Interface Mode Type State Role
--------- -------- ------- ----------------- ----------
0/16 Enabled Disabled Disabled
1/1 Enabled Forwarding Root
1/2 Enabled Discarding Alternate
! Check if RSTP state at Cisco Switch A
!
Cisco-A#show spanning-tree
VLAN0001
Spanning tree enabled protocol rstp
Root ID Priority 1
Address 0017.9470.3200
This bridge is the root
Hello Time 1 sec Max Age 11 sec Forward Delay 8 sec
Bridge ID Priority 1 (priority 0 sys-id-ext 1)
Address 0017.9470.3200
Hello Time 1 sec Max Age 11 sec Forward Delay 8 sec
Aging Time 300
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Po1 Desg FWD 3 128.96 P2p
Po3 Desg FWD 3 128.112 P2p
! Check if RSTP state at Cisco Switch B
!
Cisco-B#show spanning-tree
VLAN0001
Spanning tree enabled protocol rstp
Root ID Priority 1
Address 0017.9470.3200
Cost 3
Port 616 (Port-channel3)
Hello Time 1 sec Max Age 11 sec Forward Delay 8 sec
Bridge ID Priority 4097 (priority 4096 sys-id-ext 1)
Address 000f.247b.d080
Hello Time 1 sec Max Age 11 sec Forward Delay 8 sec
Aging Time 300
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Po2 Altn BLK 3 128.640 P2p
Po3 Root FWD 3 128.616 P2p