Filter
Top Products
White Paper Issue: October 2006 Integration of BX600 SB9 Switches in Cisco Networks Page 26 / 47
switchport allowed vlan add 10
! Set the access VLAN as native VLAN
switchport native vlan 10
exit
! This line is only needed if you are running STP on the switch
spanning-tree edgeport
! Forbid all VLANs but the access VLAN
switchport forbidden vlan add 1
switchport forbidden vlan add 10
! Permit the access VLAN
switchport allowed vlan add 20
! Set the access VLAN as native VLAN
switchport native vlan 20
exit
Step 2: Configure the Broadcom NIC
To configure the Broadcom NIC, start the “Broadcom Advanced Control Suite 2”.
This is the main window of the “Broadcom
Advanced Control Suite 2”.
Select the menu item “Tools->Create a
Team”
Enter a name for the team and press
“Next>”