White Paper Issue: October 2006 Integration of BX600 SB9 Switches in Cisco Networks Page 43 / 47
4.4.4 Configuration of TACACS
The following steps are necessary to integrate an SB9 into RADIUS authentication.
• 1. Prepare the ACS
• 2. Configure the SB9
• 3. Test the login
Step 1: Prepare the ACS
To prepare the ACS to be an authentication server for the SB9, login the web interface of the SB9 and do the following
configurations:
To add the device, press “Add
Entry”
Enter the name, IP Address and
the shared key for the device,
select TACACS+ and press
“Submit + Restart”.