Filter
Top Products
Diagnostics and Maintenance
78 C141-E252
(3) Put the above unitary packaging (packed in FCELL) into the conductivity bag by securing the
cushion.
(4) Put the drive with conductivity bag into the cardboard box.
(5) Put the desiccant (10g) into the conductivity bag.
(6) Seal the conductivity bag with the packaging tape, then close the cardboard box.
6.5.2 Multi-box packaging
(upper)
(lower)
Figure 6.3 Multi-box packaging
(1) Put the conductivity bag into the milti-box, in addition put the cushion (lower) into the bag.