Fujitsu E8310 Laptop User Manual


 
45
User Installable Features
Figure 4-11. Removing a Memory Upgrade Module
CHECKING THE MEMORY CAPACITY
Once you have changed the system memory capacity by
replacing the installed module with a larger one, be sure
to check that your notebook has recognized the change.
Windows XP: Check the memory capacity by clicking
[Start] -> Settings -> Control Panel, then double-
clicking the System icon. Select the General tab and
check the amount of memory under “Computer:”
Windows Vista: Check the memory capacity by clicking
[Start] -> Control Panel -> System and Maintenance ->
System. The amount of memory is displayed next to
“Memory - RAM:”
There may be a variation between the actual memory
size and what is displayed. This is possible if your system
is configured with an integrated Intel Graphics Media
Accelerator X3100 which dynamically allocates system
memory to accelerate graphics performance.
If the total memory displayed is incorrect,
check that your memory upgrade module
is properly installed. (If the module is prop-
erly installed and the capacity is still not
correctly recognized, see Troubleshooting
on page 51.
Memory Clip
Eagle E8310.book Page 45 Thursday, May 3, 2007 2:55 PM