Filter
Top Products
fi-5000N Getting Started 7
■ Installing the FUJITSU TWAIN32
Scanner Driver
1. Turn on the power of the PC, and log on to
Windows.
2. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
3. Click [INSTALL PRODUCTS].
4. Click [TWAIN Driver] on the window below.
5. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
6. Follow the instructions on the window to install
the software.
7. When the [InstallShield Wizard Complete]
window appears, click [Finish].
Your PC will be restarted. Do not remove the Setup CD-
ROM until your PC has completely restarted.
HINT
Windows XP screenshots are used in
this section as examples. The
windows and operations may slightly
vary depending on your OS.
ATTENTION
When using Windows 2000 or
Windows XP, log on as a user with
"Administrator" rights.
ATTENTION
This screen may not appear when the
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from "Explorer" or
"My Computer".