Filter
Top Products
vi
Do not use the device if you smell a
strange odor.
Do not install the device on unstable
surfaces.
Do not place heavy objects or stand
on top of the device.
Firmly insert the power plug.
Do not use the device immediately
after moving it from a cold place into
a warm room.
Before moving the device,
disconnect the power plug from the
power outlet.
Protect the device from static
electricity.
Disconnect the power plug from the
power outlet when the device is not
used for a long period of time.
Do not install the device in direct
sunlight.
If you detect excessive heat coming from
the device or detect other problems such as
smoke, strange smells or noises,
immediately turn off the device and then
disconnect its power plug. Make sure that
any smoke coming from it has stopped,
before contacting the store where you
bought the device or an authorized
FUJITSU scanner service provider.
Make sure that the device is installed on a
flat, level surface and that none of its parts
extend beyond the surface top, such as a
desk or table. Do not install the device on
unstable surfaces. Install the device on a
level surface that is free of vibration to
prevent it from falling.
Install the device on a strong surface that
will support the weight of the device and
other devices.
Do not place heavy objects on the device
or use the device's surface top to perform
other work. Improper installation might
cause injuries and equipment failure.
Firmly insert the power plug as far it can
go into the power outlet.
Do not use the device immediately after
moving it from a cold place into a warm
room. Condensation may occur, which
might lead to operating errors. Let the
device dry about one or two hours before
you use it.
Do not move the device with the power
and any other cable connected as this can
damage the cables, which can later cause
fire, electric shock as well as injury.
Before moving the device, be sure to
disconnect the power plug from the power
outlet, and all other cables.
Make sure that the floor is free of any
obstructions.
Install the device away from strong
magnetic fields and other sources of
electronic noise. Also, protect the device
against any static electricity, which can
cause the device to malfunction.
When the device is not going to be used for
a long period of time, be sure to disconnect
the power plug from the power outlet for
safety.
Do not install the device under direct
sunlight or near heating apparatus. Doing so
might cause excessive heat to build up
inside the device, which can cause device
trouble or even fire. Install the device in a
well-ventilated location.