Filter
Top Products
11
4. Enter the following numerical addresses:
• Primary WINS
• Secondary WINS
If a WINS server setting is not required, enter
"0.0.0.0".
5. Press the [OK] button.
⇒ The information entered is set.
Next, check the network connection.
3.9 Checking the Network
Connection
The network connection may be checked by performing
a ping test.
1. Select the [Network Settings] tab on the top
menu.
2. Press the [ ] button on the left side menu.
⇒ Scroll the left side menu down until the [Ping]
tab appears.
3. Select the [Ping] tab on the left side menu.
⇒ The "Ping" screen appears.
4. Enter the IP address, host name, or FQDN for
the server to be used to check the network
connection.
• For an IP address
The following format should be used
xxx.xxx.xxx.xxx (xxx is a value from 0 to 255).
• For a host name or FQDN
Up to 255 characters may be used.
5. Press the [Ping] button.
⇒ A ping test is performed and the results are
displayed. If the result shows "Lost=0 (0%
loss)", the network connection is functioning
normally. For any other result, refer to
"Checking Basic Network Operation with a
Ping Test" (page 23).
After performing all settings, restart the system.
3.10 Restarting the System
1. Press the [Logout] button.
⇒ The restart confirmation screen appears.
2. Press the [Restart] button.
⇒ The scanner restarts, and the "Login" screen
appears.
Next, install the Admin Tool.
ATTENTION
A Secondary WINS cannot be set
without a Primary WINS.
fi-6010N Network Scanner Getting Started
12
Chapter 4 Installing the Admin Tool
As well as operating via the touch panel, the administra-
tor can configure scanner settings via the network inter-
face. In order to do this, the Admin Tool, or Central
Admin Console, must first be installed on a personal
computer connected to the network.
The Admin Tool can set one scanner at a time. The Cen-
tral Admin Console can set multiple scanners at a time.
For more details about the Central Admin Console, refer
to the "Operator's Guide".
This chapter provides a description of the Admin Tool.
The information and procedure for installing the Admin
Tool are as follows.
*1: When installing the Admin Tool, confirm that .NET
Framework is installed. If not already installed, a message
will appear telling you to install .NET Framework from
the Microsoft Web site. When installing .NET Frame-
work, at least 280MB of additional free disk space is
required.
*2: Confirm that the latest security patch has been applied. If
the latest patch has not been applied, downloading opera-
tions (such as manual download) may not be possible. For
Windows® XP, "KB933566" must be applied to
Microsoft® Internet Explorer.
1. Specify the scanner name as a URL in the web
browser's location bar.
According to the settings from "3.6 Setting the
Admin Network" (page 9), the specified URL is
as follows:
• SSL is [Off], no port number change
http://scanner_name or IP_address/
• SSL is [Off], port number change
http://scanner_name or IP_address:port_number/
For port_number, number enter the changed port
number
• SSL is [On], no port number change
https://scanner_name or IP_address/
• SSL is [On], port number change
https://scanner_name or IP_address:port_number/
For port_number, enter the changed port number
For SSL, the "Security Alert" window is dis-
played when connecting. Press the [Yes] button
on the "Security Alert" window.
⇒ The "Login" screen appears.
2. Enter a "User Name" and "Password", and
press the "Login" button.
⇒ The "Download" screen appears.
3. Press the [Next] button for the fi Network Scan-
ner Admin Tool download.
⇒ The fi Network Scanner Admin Tool down-
load screen appears.
4. Press the [Download] button.
Software •
Operating system
• Windows® XP SP2 or later
• Windows Vista®
• Windows Server® 2003 SP2 or later
• Windows Server® 2008
• .NET Framework 2.0 SP1 or later, or
.NET Framework 3.0 SP1 or later (*1)
• Microsoft® Internet Explorer 6 SP2 or
later (*2)
Hardware • 32 MB or more of free memory space
• 64 MB or more of free disk space
• Any personal computer which runs the
supported software
• XGA monitor or better
• LAN cable
• Pointing device (e.g. mouse)