Fujitsu fi-6010N Scanner User Manual


 
13
The "File Download - Security Warning"
screen appears.
5. Press the [Run] button.
The fi Network Scanner Admin Tool Setup
Wizard appears.
6. Press the [Next] button.
The "Select Installation Folder" window
appears.
7. Specify an installation folder for the Admin
Tool.
To select a different folder, press the [Browse]
button.
To check the free space available for the currently
selected folder, press the [Disk Cost] button.
8. Select the target user(s), and press the [Next]
button.
Follow the prompts of the install wizard
windows until a "fi Network Scanner Admin
Tool has been successfully installed" message
indicates that the installation has completed.
Press the [Close] button.
When the installation is completed, logout of
the scanner, and close the Web browser.
The Admin Tool should now be usable.
Click the [Start] button, select the
[All Programs] - [fi-scanner V2.1] sub-menu,
and then click on the [fi Network Scanner
Admin Tool].
For more details about configuring settings with, or
uninstalling the Admin Tool, refer to the "Operator's
Guide".
Next, download the "Operator's Guide".
ATTENTION
Downloading is not possible while
an administrator or user operation
is being processed.
Do not close the Web browser or
logout until installation is complete.
HINT
If .NET Framework is not installed,
download and install ".NET Framework
Redistributable Package" from the
Microsoft Website. After installing the
package, try again from Step 1.
ATTENTION
Installation will fail if the length of
any installation path (folder path plus
installation file name) exceeds 259
characters. Select an installation
folder that respects this limit.
fi-6010N Network Scanner Getting Started
14
Chapter 5 Downloading the Manual
In addition to this "Getting Started" guide, a "Operator's
Guide" is also available.
The "Operator's Guide" contains information about
scanner settings, scanner administration, and scanner
operations.
Consult this manual when using the scanner.
The "Operator's Guide" is a PDF file, and can be viewed
with Adobe® Reader® (*).
* Adobe® Reader® can be downloaded from the fol-
lowing site.
http://www.adobe.com/
Login as the administrator via the network interface to
download the "Operator's Guide".
The download procedure is as follows:
1. From the [Start] menu, point to [All Programs] -
[fi-scanner V2.1], and then click [fi Network
Scanner Admin Tool].
The Admin Tool is started.
2. Specify the "Connect to" (of the scanner).
Enter the IP address, scanner name, or FQDN
name for the scanner to be setup or managed.
3. Press the [Connect] button.
The "Login" screen appears.
4. Press the [Download Manual] button.
The "File Download" dialog box appears.
5. Press the [Save] button.
The "Save As" dialog box appears.
6. Select a folder and enter a file name.
7. Press the [Save] button.
The file is saved.
Next, perform a scan test.
ATTENTION
If the port number was changed in
"3.6 Setting the Admin Network"
(page 9) enter the changed port
number for "Port Number".
When trying to connect with a port
number other than the specified
number, it will take up to 20 sec-
onds before a connection error
occurs.
To use SSL, select the [Use HTTPS]
checkbox.
If the Admin Tool is started while
there is insufficient free memory, a
script error may occur. Try again
after ensuring that there is enough
free memory.
ATTENTION
When the [Download Manual] button
is pressed, if Adobe® Reader® has
not been installed, and the [Open]
button on the "File Download" dialog
box is pressed, a "Connection error"
will occur.