Filter
Top Products
52
B-5. Specifications of Power Supply
(1)Operating voltage: DC 24V±10%
(2)Current consumption
-Standby: 0.3 A (on average)
Note: Maximum drawer kick drive current: 1 A
Two drawer kicks must not be driven simultaneously.
-Average current consumption Operating: 1.5 A
(at 24 V, 25ºC, print density setting 100%, paper width 80 mm, print
duty 9%)
Arrangement of power
connector pins
Pin No. Signal Name
1 +24 V
2 SG
3 N.C
Note:
1.This power connector is used to supply the control and mechanical
sections of the printer.
2.This power connector must not be used to supply power if power is
supplied from the interface connector. Doing so may result in
malfunction, fire or electric shock.
APPENDIX
1
2
3