Filter
Top Products
56
MEMORY SWITCH
RETURN TO SETUP MENU
OTHER
SERIAL INTERFACE CONDITION
CUSTOMIZE VALUE
MEMORY SWITCH
POWER ON STATUS
RETURN TO SETUP MENU
RETURN TO UP
COVEROPEN ERROR
BM CHECK AT POW-ON
•
POWER ON STATUS DISABLE
POWER ON STATUS DISABLE
POWER ON STATUS ENABLE
Note:
Use a roll of paper having a diameter no larger than 50 mm.
Using a larger roll might cause the paper to fold or abnormal
noise. To use a Windows PC as the host, use the setup utility
software. (To purchase the setup utility software, contact your
sales agent.)
(4) After the setup is complete and "END" is printed, press the FEED
switch for about two seconds. This cancels setup mode, and
initialization of the printer begins.
APPENDIX
:Setup group items
:Setup items
(of memory switch)
:Detail setup items
(of power-on notification)
SELECTION ITEM
SELECTION ITEM
SELECTION ITEM
SELECTION ITEM