Filter
Top Products
58
Note:
If connecting this product to a Windows PC via the serial interface, do
not select "DSR(#6)RESET: ENABLE ."
If "Valid" is selected, this product might not operate even if the printer
power is turned on. In this case, turn off the power, disconnect the
interface cable from the printer, turn the power back on, and select
"DSR(#6)RESET: DISABLE" in setup mode.
"DSR(#6)RESET: ENABLE" is supplied only for special specifications.
(2) CUSTOMIZE VALUE setup items
No. Item Explanation Detail setup item
1 USER NV
MEMORY
-Capacity of the user NV
memory
1KBYTE 64KBYTE,
128KBYTE 192KBYTE
2 NV GRAPHIC
MEMORY
-Capacity of the NV graphic
memory
None 64KBYTE 128KBYTE
192KBYTE 256KBYTE
320KBYTE 384KBYTE
3 PRINT WIDTH -Width of paper 58mm
80mm
4 PRINT DENSITY -Print density 70% 75% 80% 85% 90%
95% 100% 105% 110%
115% 120% 125% 130%
5 PRINT COLOR -Print colors
-The color specification
command is invalid unless
"Dual-tone" is specified for this
item.
MONO
TWO
6 RETURN TO UP -Returns to the selection mode
for the setup group items.
7 RETURN TO
SETUP MENU
-Returns to the setup menu.
(3) SERIAL INTERFACE CONDITION setup items
No. Item Explanation Detail setup item
1 BAUDRATE -Baud rate 2400BPS 4800BPS
9600BPS 19200BPS
38400BPS 57600BPS
2 FORMAT -Data format 7EVEN1 7ODD1
8NONE1 8EVEN1
8ODD1
3 PROTOCOL -Buffer control protocol XON/XOFF
DSR/DTR
4 RETURN TO UP -Returns to the selection mode
for the setup group items.
5 RETURN TO
SETUP MENU
-Returns to the setup mode.
APPENDIX