Fujitsu FPCM11981 Tablet User Manual


 
Working with the notebook
Optical drive
Opticaldrive
This product c onta ins a light emitting diode, classied in accordance with IEC
8251:1993: LASER CLASS 1, and must therefore not be opened.
Handling data carriers
Handling
Observe the following guidelines when ha ndling data carriers:
Avoid touching the surface of a data c arrier. Only han dle data carriers by th eir edges.
Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
Protect your data carriers aga inst dust, mechanical vibrations and direct sunlight.
Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data c arrier of lesser quality, vibrations and reading errors may occur.
CD/DVD indicator
CD/DVDindicato
r
The CD/DVD indicator ashes when a data carrier is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier h as been inserted, but
instead continues to ash, this means that the drive cannot access the data carrier.
Either t he data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Fujitsu Technology Solutions 67