117
- Before Using the Wireless LAN
Before Using the Wireless LAN
This manual describes the procedures required to properly setup and configure the optional integrated Wireless LAN
Mini Card device (referred to as “WLAN device” in the rest of the manual). Before using the WLAN device, read this
manual carefully to ensure its correct operation.
Wireless LAN Devices Covered by this Document
This document is applicable to systems containing the following WLAN device:
• Integrated Intel® Centrino® Wireless-N 2230
Characteristics of the WLAN Device
• The WLAN device is a Mini-PCI card attached to the main board of the mobile computer.
• The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license.
The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and
upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.
• The WLAN device is capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and
IEEE802.11n.
• The WLAN device is Wi-Fi certified and operate (as applicable) at a the maximum data rate of 450 Mbps
(theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.
• The WLAN device supports the following encryption methods - WEP, TKIP, CKIP, and AES encryption.
• The Wireless LAN device is compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and
CCX4.0.