62
- Device Ports
Headphone/Line-Out Jack
The headphone/line-out jack allows you to connect headphones or powered external speakers to your notebook. Your
headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In order to connect headphones
or speakers align the connector with the port opening on the front of the system, then push the connector into the
port until it is seated.
DUE TO THE ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES AND/OR DRIVERS ARE GUARANTEED TO WORK.
* The Anytime USB Charge feature can be enabled and
disabled from the BIOS Setup Utility (
See “BIOS Setup
Utility” on page 38.) There are three possible settings for
this feature: “Disable Anytime USB Charge function”, “Only
enable Anytime USB Charge function with AC Adapter”,
and “Enable Anytime USB Charge function with AC Adapter
or battery”. Note that if the setting is selected, the
function will eventually drain the battery if the AC Adapter
is not plugged in.
Figure 35. Connecting a USB Device
IF YOU PLUG HEADPHONES INTO THE HEADPHONE JACK, BUILT-IN STEREO SPEAKERS WILL BE DISABLED.
USB 3.0 Ports
USB 3.0 Port with
Anytime USB Charge
capability*