Fujitsu Fujitsu Lifebook T730 Laptop User Manual


 
72
- Starting Your LifeBook Tablet PC
The boot sequence is executed when:
You turn on the power to your LifeBook Tablet PC.
You restart your Tablet PC from the Windows Shut Down dialog box.
The software initiates a system restart. Example: When you install a new application.
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive(s). This
feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about
accessing the utility.
BIOS Setup Utility
The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook Tablet PC.
Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change
the BIOS’ environment to operate your Tablet PC.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing I/O addresses and boot devices.
System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the setup utility, do the following (or use the TrustedCore Menu, as detailed in the next section):
1 Turn on or restart your LifeBook Tablet PC.
2 To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
REMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND MASTER HARD DISK
PASSWORDS, FUJITSU WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND HAVE TO REPLACE
YOUR SYSTEM BOARD OR HARD DISK DRIVE.
Curlin_WWAN-B6FJ-5051-02ENZ)-00.book Page 72 Tuesday, October 19, 2010 1:57 PM