Filter
Top Products
6-4
Contents of the Setup or Browse Mode
This section describes the contents of the setup mode.
The setup mode can be classified into 26 types.
Remarks
• Not displayed in setup mode selected by
turning power on with
MENU
pressed.
• Displayed when the video or TP interface is
used.
• Parameters set by the host computer cannot
be changed.
The selection set by the host computer cannot
be changed.
The selection set by the host computer cannot
be changed.
Overrides the selection set by the host
computer.
The selection set by the host computer cannot
be changed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Setup item
Settings
Paper length check
Paper thickness check
Paper thickness setup
Skew check
IPC-3 mode
Hopper height
Paper separation level
Drop-out color
Consumable counter
Consumable counter
reset
Consumable alarm
mode
Buzzer
Buzzer volume
LCD contrast
Picking speed
Description
Sets simplex/duplex scanning, paper size,
density, resolution, and halftone.
Enables or disables the function which
detects a paper length error.
Makes the paper thickness detetion function
enabled or disabled, and sets the detection
method.
Sets the permissible paper thickness to
detect a double feed error.
Enables or disables the function which
detects a skew error.
Selects a pattern to be set in the image
processing option.
Sets the initial position of the hopper.
Sets the power of separating sheets of
paper.
Selects a drop-out color.
Sets the interval (in ten thousands) in which
a consumable alarm occurs.
Resets the accumulated count of the
consumable counter.
Sets how to notify the alarm when the
accumulated count of the consumable
counter reaches the set value.
Activates or inactivates the buzzer sound
when an error occurs.
Sets the volume of buzzer or click sound.
Sets the contrast of the LCD.
Selects the speed of the pick roller.