Filter
Top Products
6-10
<<SETUP MODE>>
Paper Length Check
Ready
Paper Length Check
ON 10 mm
4. Press .
The current difference 10 mm blinks (blinking
indicates “changeable”).
5. Press or .
The displayed option changes (15 mm or 20 mm).
6. When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Paper Length Check).
7. Press
CANCEL
two times.
The LCD returns to the Ready screen.
Paper Length Check
ON 20 mm
Paper thickness check
This function determines whether or not to enable the paper thickness which is set by the “paper
thickness setup” function to detect a double feed error. You cannot change settings if they are set by
the host computer.
Remarks
Off: sets the double feed check disabled.
Thickness & Roller: detects a double feed error
by checking the document transmissivity
and the rotation of the brake roller.
Thickness Check: detects a double feed error
by checking the document transmissivity.
LCD display
Paper Thickness Check
Options
Off, Thickness & Roller, Thickness Check
(Default: Off)
The following is an example of operation when you use this function.