Filter
Top Products
6-25
Consumable alarm mode
This function is to be used how to notify the alarm when the accumulated count of the consumable
counter reaches the set value.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
Remarks
Alarm & Stop scanning: When the
accumulated count reaches the set
value of the consumable counter,
the alarm is displayed on the LCD
and the scanning operation stops.
Message only: When the accumu-
lated count reaches the set value of
the consumable counter, the alarm
is displayed on the LCD. (The
scanning operation does not stop.)
LCD display
Consumable Alarm
Mode
Options
Alarm & Stop scanning
Message only
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until “Consumable
Alarm Mode” appears in the lower line of the
menu screen.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Consumable Alarm Mode
The following is an example of operation when you use this function.