Filter
Top Products
6-41
Ready
Manual feed timeout
This function sets the waiting time from when the host computer issues a scan command to when
paper is manually put on the hopper. A manual feed timeout error occurs if this time elapses without
putting paper on the hopper.
Remarks
Unit: second
LCD display
Manual Feed Timeout
Options
1 S to 255 S (Default: 30 S)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until “Manual Feed
Timeout” appears in the lower line of the
menu screen.
3. Press
ENTER
.
The option select screen appears with the
current setting 30 S blinking (blinking indi-
cates “changeable”).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Manual Feed Timeout
Manual Feed Timeout
30 S
The following is an example of operation when you use this function.
6. Press
CANCEL
two times.
The LCD returns to the Ready screen.