Filter
Top Products
6-20
Drop-out color
This function sets a drop-out color for front and back sides of paper respectively. You cannot change
settings if they are selected by the host computer.
RemarksLCD display
Drop-out Color
Options
Front: Green, Red, Blue (Default: Green)
Back: Green, Red, Blue (Default: Green)
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until “Drop-out Color”
appears in the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the
current setting Green (for Front) blinking
(blinking indicates “changeable”).
4. Press .
Green (current option for Back) blinks (blink-
ing indicates “changeable”).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Drop-out Color
Drop-out Color
Front: Green Back: Green
Drop-out Color
Front: Green Back: Green