Filter
Top Products
6-48
Setup mode lock
This function inhibits the operator panel from entering setup mode from normal mode, protecting the
operator panel from misoperation. Once the operator panel is locked, you cannot use the setup items
except those allocated to the
F1
,
F2
, and
F3
buttons.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
RemarksLCD display
Setup Mode Lock
Options
On, Off (Default: Off)
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until “Setup Mode
Lock” appears in the lower line of the menu
screen.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Setup Mode Lock
To cancel the setup mode lock state, turn off the power and turn on the power while pressing the
MENU
button to enter the setup mode. In the setup mode, select the Setup Mode Lock function
and set the option to OFF.
The following is an example of operation when you use this function.