Filter
Top Products
6-36
SCSI ID
This function sets the ID number for the SCSI interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
RemarksLCD display
SCSI ID
Options
0 to 7 (Default: 5)
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen (Settings
or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and the
“Paper Length Check” screen first appears when
your scanner is not controlled through the video
or TP interface.
2. Press repeatedly until “SCSI ID” appears in
the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the current
setting 5 blinking (blinking indicates “change-
able”).
4. Press or .
The displayed option changes (6, 7, 0, 1, 2, 3, 4).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
SCSI ID
3
<<SETUP MODE>>
SCSI ID
SCSI ID
5