Fujitsu MCP3130SS Computer Drive User Manual


 
Installation Requirements
3-6 C156-E228-02EN
Position after a cartridge is loaded
B
ottom of
the frame
Position when loading a cartridge
Center of a cartridge when loaded
A-A Section
Below 3.3
Panel
Below 7.8
Figure 3.2 Outer dimensions (2 of 2)
Notes
1. Fujitsu recommends using the dimensions indicated by asterisks in the above
figure for the size of the panel opening.
2. If the specified dimensions are not used, the MO disks might be damaged
when a cartridge is loaded.