Filter
Top Products
5 - 58 C141-E116-01EN
*9 Off-line data collection capability [16Fh]
Bit Description
0 If this bit is set to 1, it indicates SMART EXECUTE OFF-LINE
IMMEDIATE subcommand is supported. (FR register = D4)
1 Vendor unique
2 If this bit is set to 1, it indicates off-line data collection being
aborted when a new command is received.
3 If this bit is set to 1, it indicates SMART off-line read scanning is
supported.
4 If this bit is set to 1, it indicates SMART Self Test is supported.
5 to 7 Reserved bits
*10 SMART capability flag [170-171h]
Bit Description
0 If this bit is set to 1, it indicates the attribute data is saved to the
media before the drive enters power save mode.
1 If this bit is set to 1, it indicates the device saves the attribute
automatically according to fixed operation.
2-15 Reserved bits
*11 Drive error logging capability [172h]
Bit Description
0 If this bit is set to 1, it indicates the drive error logging is
supported.
1 to 15 Reserved bits
*12 Quick Test completion time [minutes]
This value indicates the processing time of the Quick Test (off-line mode).
*13 Comprehensive Test completion time [minutes]
This value indicates the processing time of the Comprehensive Test (off-line mode).
*14 Check sum
Twos complement of the lower byte, obtained by adding 511-byte data one by at a time from
the beginning.