Filter
Top Products
C141-E116-01EN3 - 16
(3) Special jumper settings
(a) 2.1 GB clip (Limit capacity to 2.1 GB) / 33.8 GB clip (Limit capacity to 33.8 GB)
If the drive cannot be recognized by system with legacy BIOS’s which do not allow single
volume sizes greater than approximately 2.1 GB, the following jumper settings should be
applied.
This jumper settings is also used as the 33.8 GB clip for MPG3409AH-E. (MPG3409AH-E
does not have the 2.1 GB clip feature.)
Slave DeviceMaster Device Cable Select
8642
97531
8642
97531
8642
97531
Model No. of cylinders No. of heads No. of sectors Capacity
MPG3204AH-E 4,092 16 63 2.1 GB
MPG3307AH-E 4,092 16 63 2.1 GB
MPG3409AH-E 16,383 16 63 33.8 GB
(b) Slave present
If the slave device does not use the Device Active/Slave Present (DASP–) signal to indicate its
presence, the device is configured as a Master with slave present when the following jumper
settings is applied.
Slave present
8642
97531
NOTE:
The following Jumper Plug is the recommended specification for jumper setting on this device.
Parts name Parts number Manufacturer Remarks
IMAS-9251H-GF IRISO ELECTRONICS CO., LTD
Jumper Plug
206-A-BLK OUPIIN ENTERPRISE CO., LTD
2.54 mm Pitch
! 0.64 mm