Filter
Top Products
4
Checking the Contents of the Package
When unpacking the switch device, make sure that all of the following parts are provided in the package.
If the package does not contain all of the parts, immediately contact your agent.
Keep the packing box (product box) in a safe place as it will be needed when sending the switch
device in for repair.
● Main unit :1
● User's Manual :1
● AC adapter :1
● AC code (for USA & for EC) :2
● VGA Cable(1.8m) :2
● Audio Cable (1.8m) :2
● PS/2 Cable(1.8m) :2
● USB Cable(1.8m) :2
● Stand :1
● USB Bridge Software (CD) :1
Characteristics
● Two consoles (monitor, keyboard or mouse) that up till now have been connected to individual hosts
can be shared as a console pair by connecting two hosts to the switch device. This considerably
saves installation space.
● Use of the USB Bridge function allows a printer or storage device to be shared between two PCs,
and also allows free movement of files between the two PCs.
● Up to two hosts can be connected to the switch device.
● An AC adapter is not required as power is supplied from the keyboard/mouse port on the host.
(However, be sure to connect the special AC adapter when using the switch device on the USB
port.)
● The switch device has an independent microcomputer (MPU) to control all ports (keyboard, mouse
and each host port). For this reason, the states (key code mode, Num, Caps, Scroll state and mouse
output mode) of the keyboard and mouse at each host is monitored by the MPU of each port to
achieve stable switching at all times.
● PS/2 keyboards and mice are supported.
● 2/3 button, various wheel mice (Microsoft IntelliMouse, IntelliMouse Explorer, Logitech MouseMan
Wheel, Cordless MouseMan Optical, etc.), IBM Scroll Point Mouse, Fujitsu FID677 (multi-scroll
mouse) are supported as PS/2 mice.
● A PS/2 keyboard and mouse can be used on the USB port. In this case, standard 3-button wheel
mouse functions are supported.
● One USB HUB port is provided for each port. The corresponding HUB port is enabled when the
switch device is connected to the USB port. As the HUB port is connected (fixed) for each host, the
host can be switched even if the USB device connected to the HUB port is operating. The HUB port
is enabled at all times regardless of whether or not the host is selected, and cannot be switched.
● VGA, SVGA, multi-sync resolution 1600 x 1200, and bandwidth 200 MHz are supported.
● The host can be easily selected by the Select Switch or from the keyboard (Hot Key mode).