Filter
Top Products
E-38
INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in
the MENU to factory settings.
1
Press Y .
The main menu screen will appear.
2
Press a or b to select “Display
Menu” and press
d or Z.
3
Press a or b to select “FACTORY
DEFAULT” and press
d or Z.
Each time you press a or b, one of the available
menus appears in the following sequence:
PICTURE < AUDIO < POSITION/SIZE <
FEATURES < FACTORY DEFAULT
The “FACTORY DEFAULT” menu screen will appear.
4
Press Z.
• Displays the message of whether to proceed with the
initialization.
5
Press a or b to select the “Yes”.
6
Press Z.
• The message of having completed the initialization
will be displayed after initializing.
7
Press Y or h when you finish.
“Display Menu” selected in the main
menu screen
“FACTORY DEFAULT” selected in the
main menu screen
Displays the message of whether to
proceed the initialization
Displays the message of having
completed the initialization
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use.
• The adjustment range varies depending on the display signal. Adjust to a desired picture quality in the allowable adjustment range.
• Setting and adjustment may be disabled depending on the signal type.
• If a new setting is made for Tuner (digital terrestrial TV), it cannot be changed back to the factory default again.
7701_01_E.book 38 ページ ２００７年３月２２日 木曜日 午後２時３８分