Filter
Top Products
E-9
English
Digital audio output terminal (AUDIO OUTPUT DIGITAL)
Connect this terminal to the digital audio input terminal of the audio amplifier.
Digital audio signals are output in PCM format.
Analog audio output terminal (AUDIO OUTPUT ANALOG)
Connect this terminal to the analog audio input terminal of the audio amplifier.
Component Video input terminal (VIDEO4 INPUT/Y P
B PR)
Component Video input terminal (VIDEO3 INPUT/Y PB PR)
Connect this terminal to the Component Video Output terminal of DVD recorder/player or satellite receiver.
" Audio4 input terminal (AUDIO4 INPUT)
# Audio3 input terminal (AUDIO3 INPUT)
Connect this terminal to the audio output terminal of VCR or PC, etc.
$ Antenna input terminal (RF INPUT)
Connect this terminal to the VHF/UHF antenna signal.
% CI Module slot (COMMON INTERFACE)
Insert pay-TV carrier’s CI Module into this slot, when receiving pay-TV. (See P. E-15.)
& Power input terminal
Connect this terminal to the power cord supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-6.)
•The table below shows the settings of Audio inputs. (Factory setting)
* For changing of Audio input settings, see “Audio Input” on P. E-36.
Video input
Audio Input
RGB1 (mD-sub)
No Audio
Video1 (SCART) Audio1 (SCART)
Video2 (SCART)
Audio2 (SCART)
Video3 (Component Video)
Audio3
Video4 (Component Video) Audio4
Video5 (HDMI)
Audio5 (HDMI)
Video6 (HDMI)
Audio6 (HDMI)
7701_01_E.book 9 ページ ２００７年３月２２日 木曜日 午後２時３８分