Filter
Top Products
E-39
English
ANALOG TV MODE SETTING (TV MENU)
• The setting shown below is the setting for analog TV
broadcasts. First, press
" and select the analog TV
mode. (See P. E-22.)
1
Press Y .
The “TV Menu” will appear.
2
Press a or b to select “TV Menu”
and press
d or Z.
3
Press a or b to select the items
for setting. It is switched as shown as
below.
Auto Scan < Manual Scan < Sort
Press
Z to proceed to the next step.
Press
c or d to select the country or region, and then press
Z.
All the channels are scanned, and only the channels that can be
received are assigned to the Program Nos.
* Several minutes are required to scan all the channels. To
cancel the operation in progress, press
Y .
Press c or d to select the Program No. to be stored.
Press a or b to select the Manual Store items to be set
(Setting or Name).
Press
Z to proceed.
Setting
Press a or b to select the setting item.
Freq. < System < Adjust < Skip
•Freq.
Each time
c or d is pressed, the TV frequency is switched.
•System
Each time
c or d is pressed, the TV SYSTEM is switched.
< West Euro (standard BG reception) <
East Euro (standard DK reception) <
UK (standard I reception) < France (standard
LL’ reception) <
• Adjust
Each time
c or d is pressed, the fine-tune adjustment for
Tuning is switched.
•Skip
This function specifies whether or not to use the Skip
function for the displayed Program No.
Each time
c or d is pressed, the setting is switched.
<
Off
<
On
<
[Off]: The Skip function is not available when Channel
Up/Down has been selected.
[On]: The Skip function is available when Channel Up/
Down has been selected.
Press
Z to store.
* Select “On” when you want to skip the channels that they
are not broadcasting programs.
Name
An eight-character name can be specified for each Program
No.
Press
c or d to select the character input position, and
a or b to switch through the characters.
When the input is completed, press
Z to store.
* When switching the programs, etc., the OSD becomes
the indication by the stored name.
This function sorts the name, the data and the contents of
stored programs.
Press
a or b to select To (edit destination)/From (edit
source), and
c or d to switch the Program No.
Press
Z to store.
Auto Scan
Manual Scan
“TV Menu” screen
Sort
7701_01_E.book 39 ページ ２００７年３月２２日 木曜日 午後２時３８分