Fujitsu P37FT05AEB Computer Monitor User Manual


 
E-41
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
a or b to select the channel and press 1 (Fav),
2 (Lock), 3 (Delete) on the remote control.
The password input screen is displayed.
When this screen is displayed, input the password. (Opera-
tion is different depending on the Password mode setting.)
* The factory set password is “0000”.
Press
Z to store.
1: Fav (Favourite)
Your favourite channels can be registered.
When registered, it can be easily changed into your
favourite channel by using
| .
2: Lock (Channel Lock)
Channel Lock can be set.
When a channel with “Channel Lock” set was selected, it
cannot be watched if a password is not entered.
3: Delete
Clears the channels acquired by Auto Scan so they cannot
be watched.
* Once deleted, a channel cannot be recovered without
performing the Auto Scan or Carrier Setup Rescan
operation.
* When Auto Scan is performed, the registered information
such as Fav or Lock may be lost.
Switch the order of the displayed channels.
The order of the channels can be changed as follows:
Use
a or b to select the channels.
Press
4 (Sort).
Use
a or b to move to the position you want to
insert selected Channel Name.
Press
Z to store.
* The Sort menu may not be displayed depending on the
broadcast station.
Switch the TV and Radio list display.
5 When (TV/Radio) is pressed, TV channel list and
Radio channel list are switched.
* Each time the Auto Scan, Manual Scan and Carrier
Setup setting screen is entered, the Password input
screen is displayed. After this screen is displayed, enter
the password. (Operation is different depending on the
Password mode setting.) (See P. E-42.)
* The factory set password is “0000”.
Automatically sets the receiving channel.
Press
c or d to select the country name.
<
United Kingdom
<
France
<
Germany
<
Italy
<
Spain
<
Press Z to start Auto Scan.
The Channel and Frequency can each be set, and a specific
Channel and Frequency can be scanned.
* The Signal Quality of each can be checked.
Delete and Rescan can be performed for each Carrier.
i (Delete): Deletes the Carrier from the list.
j (Rescan): Automatically reacquires Carrier.
CHANNEL MANAGER
Fav, Lock, Delete
Sort
“CHANNEL MANAGER” selection screen
TV / Radio
SYSTEM INSTALLATION
Auto Scan
Manual Scan
Carrier Setup
“SYSTEM INSTALLATION” selection screen
NOTE -Lock (Channel Lock)
When an operation other than the specified operation is performed while the Password input screen was displayed, the screen may become blank or
“Locked Service” screen may be displayed. In this case, press
M or N and reset to the channel you want to watch.
7701_01_E.book 41 ページ 2007年3月22日 木曜日 午後2時38分