Filter
Top Products
PRN608-S
28-03-2003 Page 3-28 of 53
3.8.33 Change dot size
[Name] Change dot size
[Format] ASCII ESC f n
Hex 1B 66 n
Decimal 27 102 n
[Description] If n = 0x01, then the board is set to
FTP628MCLxxx.
If n = 0x02 then is it set to FTP638MCLxxx.
The value is saved to flash,
3.8.34 Change form feed length
[Name] Change form feed length
[Format] ASCII ESC g n
Hex 1B 67 n
Decimal 27 103 n
[Description] N represents the value in mm that is form
feeded after the feed command is sent. The
value is saved to flash.
3.8.35 Change baud rate
[Name] Change baud rate
[Format] ASCII ESC h n
Hex 1B 68 n
Decimal 27 104 n
[Description] N represents the new baud rate, legal values
for n = 1 to 255. The baud rate is calculated
as 921600/n = new baud rate.
For instance 921600/8 = 115200baud.
The value is saved to the flash
3.8.36 Change form feed time
[Name] Change form feed time
[Format] ASCII ESC i n
Hex 1B 69 n
Decimal 27 105 n
[Description] N represents the time between that the
board registry incoming paper, and to it
starts feed the auto form feed length. The
time is calculated as n * 50msec. The default
setting is 2 seconds. The value is saved to
flash. Legal values for n are between 1 and
255.