Filter
Top Products
PRN608-S
28-03-2003 Page 3-29 of 53
3.8.37 Feed Paper
[Name] Feed Paper
[Format] ASCII GS n
Hex 1D n
Decimal 29 n
[Range] n: [-128;127]
[Description] When the printer controller receives this command the
paper will be fed n-dot lines. If the value is negative a
reverse form feed will be made.
3.8.38 Compensate Burn time
[Name] Compensate burn time
[Format] ASCII RS n
Hex 1E n
Decimal 30 n
[Range] n: [-15;15]
[Description] When the printer controller receives this command the
burn time will be compensated. If a negative value is
send the printout intensity will be lighter and if a positive
value is send the printout intensity will be darker.
3.8.39 Bar code width setting
[Name] Bar code width setting
[Format] ASCII ESC e m
Hex 1B 65 m
Decimal 27 101 m
[Range] 2<=m
[Default] m=6
[Description] Parameter n is ignored
Parameter m is used to determine the dot width of the
narrow and wide bar lines. The wide bar lines is equal
to m dots and the narrow is equal to m/2 dots (rounded
down).