Filter
Top Products
62 Operating Manual RX600 S6
Starting up and operation
5.1.1.4 Indicators on the hot-plug HDD/SSD modules
Figure 9: Indicators on a hot-plug HDD/SSDmodule
If a hard disk drive continuously indicates an error, the drive should be replaced
as soon as possible. This can be done during operation (see "Hot-plug
HDD/SSD modules" on page 94).
1 HDD/SSD BUSY (green)
– Lights up: HDD/SSD in active phase (drive active, drive being
accessed)
– Does not light: HDD/SSD inactive (drive inactive)
2 HDD/SSD FAULT (orange)
– Does not light: no HDD/SSD error
– Lights up: HDD/SSD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD/SSD module is
not correctly inserted)
– Slow flashing: HDD/SSD Rebuild (the data is being restored after
changing a drive)
1 2