Filter
Top Products
RX600 S6 Operating Manual 95
CSS components
● Use the device on a shock and vibration free surface.
● Do not use the unit in extremely hot or cold locations, or locations with
extreme temperature changes.
● Never attempt to disassemble the hard disk unit.
Handling drives and HDD/SSD modules
Drives incorporated in the HDD/SSD modules are highly sensitive
electromagnetic devices and must be handled with great care. Incorrect
handling can cause partial or total failure of the drives. These failures can result
in data errors and to a loss of data or to total corruption of the drive.
Observe the following rules to prevent such problems occurring:
● Only store and transport HDD/SSD modules within the limits stipulated in the
specification.
● When transporting HDD/SSD modules (even over short distances), always
use the original packaging (ESD label).
● Never expose HDD/SSD modules to a temperature shock. Avoid the
formation of condensation inside and on the outside of the drive.
V CAUTION!
The HDD/SSD module must be acclimatized in its operating
environment for an acclimatization time before it is started up for the
first time.
Temperature difference (°C)
(operating environment/
outside)
Minimum acclimatization time
(hours)
53
10 5
15 7
20 8
25 9
30 10
Table 5: Acclimatization times for HDD/SSD modules