Filter
Top Products
1. OPERATION
1-8
1.5 Setting up the Displays
Four display types are available: digital, graph, graphic, and highway. You may
freely select and arrange what data to display in the digital, graph and graphic
displays. The order in which displays are shown may also be changed. Note that
the highway display cannot be adjusted.
1.5.1 Choosing display type
1. Press the [MENU] key once (twice when Highway display is shown) to open
the main menu.
MAIN MENU
USER DISP
ALARM1
ALARM2
MESSAGES
RESET
OFFSETS
SYS SETUP
I/O SETUP
TD SETUP
LANGUAGE
UNITS
HDG SETUP
Accessible only when
heading sensor PG-1000
or C-2000 is used.
Main menu
2. Use the cursor pad to select USER DISP and then press the [ENT] key.
USER DISPLAY SETUP
1: DIGITAL
2: DIGITAL
3: DIGITAL
4: DIGITAL
5: DIGITAL
User display setup menu
Note: 1-5 show the currently selected display type.
3. Use the cursor pad to select display number desired and then press the
[ENT] key.
DIGITAL
GRAPH
GRAPHIC
HIGHWAY
DIGITAL
GRAPH
GRAPHIC
HIGHWAY
OFF
#1 display
#2-#5 displays
User display options
4. Select display type among DIGITAL, GRAPH, GRAPHIC, HIGHWAY and
OFF as appropriate and then press the [ENT] key.
5. For digital, graph and graphic follow one of the procedures on the next
several pages to choose the data to display.