Filter
Top Products
1. OPERATION
1-17
4. Select alarm type desired and then press the [ENT] key.
OFF: Turns off the water temperature alarm.
LOW: Alarm triggered when the water temperature is lower than the water
temperature setting.
HIGH: Alarm triggered when the water temperature is higher than the
water temperature setting.
INSDE: Alarm triggered when the water temperature is inside the water
temperature range setting.
OUTSD: Alarm triggered when the temperature is outside of the water
temperature range setting.
SHEAR: Alarm triggered when the water temperature varies more than the
temperature setting within one minute.
5. If you turned on the alarm, press the [ENT] key and then use the cursor pad to
enter the alarm setting: Use ◄ or ► to select location, and press ▲ or ▼ to enter
value. For INSDE and OUTSD, enter lower value on top, higher value below.
6. Press the [ENT] key.
7. Press the [MENU] key twice to close the menu.
1.7.4 Depth alarm
The depth alarm warns when the depth is lower or higher than the depth setting,
or is inside or outside of the depth range setting.
1. Press the [MENU] key once or twice to show the main menu.
2. Select ALARM1 and then press the [ENT] key.
3. Select DEPTH and then press the [ENT] key to show the depth alarm options
window.
OFF
LOW
HIGH
INSDE
OUTSD
Depth alarm options window
4. Select alarm type desired and then press the [ENT] key.
OFF: Turns off the depth alarm.
LOW: Alarm triggered when the depth is shallower than depth setting.
HIGH: Alarm triggered when the depth is deeper than depth setting.
INSDE: Alarm triggered when the depth is inside the depth range setting.
OUTSD: Alarm triggered when the depth is outside of the depth range setting.
5. If you turned on the alarm, press the [ENT] key and then use the cursor pad to
enter the alarm setting: Use ◄ or ► to select location, and press ▲ or ▼ to enter
value. For INSDE and OUTSD enter lower value on top, higher value below.
6. Press the [ENT] key.
7. Press the [MENU] key twice to close the menu.