Filter
Top Products
RS
FUNCTION: Reset
DESCRIPTION:
The RS command resets the state of the processor to its power-on condition. The previously
saved state of the controller, along with parameter values, and saved sequences are
restored.
The RS-1 command resets the state of the processor to its factory default without modifying
the EEROM.
USAGE:
While Moving Yes Default Value ---
In a Program No Default Format ---
Command Line Yes
Can be Interrogated No
Used as an Operand Yes
Controller Usage
ALL
OPERAND USAGE:
_RS contains the power-up error: bit 0 for variable checksum error
bit 1 for parameter checksum error
bit 2 for program checksum error
bit 3 for master reset error (no program to execute)
EXAMPLES:
RS Reset the controller
176 ● RS DMC-1400 Series Command Reference