Garmin 110 Network Card User Manual


 
Rino
®
110 Owner’s Manual 5
GETTING STARTED > OPERATING THE RINO 110
Operating the Rino 110
For best results, you should initialize the GPS receiver in
your Rino 110 unit before you use it the first time. Refer
to the “Initializing the Rino 110” section later in this
manual for instructions on initializing the unit.
The Rino 110 is programmed to provide “pop-up”
messages concerning operational characteristics and
conditions. Press the Thumb Stick In to acknowledge a
message and return to the current feature.
To use the
Thumb Stick:
Press In to enter highlighted options and to
confirm messages
Move Up, Down, Right or Left to move through
lists, highlight fields, on-screen buttons, icons,
enter data, or move the map panning arrow
Press In and hold to display the Shortcuts Menu.
To use the page Option Menu:
1. Highlight the Option Menu on-screen button
at the top of the display screen and then press the
Thumb Stick In to open the menu.
2. Highlight the desired menu option and press the
Thumb Stick In to activate the option.
3. To close without making a selection, move the
Thumb Stick to the Right.
To lock/unlock the keys:
1. Press and hold the Thumb Stick In to access the
Shortcuts Menu. Highlight Enable Keylock and
press the Thumb Stick In. The Talk key is now
locked.
2. To unlock, press and hold the Page key until
“Keylock Disabled” is displayed (about 5 seconds).
Keylock Pop-up Message