Filter
Top Products
Rino
®
110 Owner’s Manual 31
UNIT OPERATION > NAVIGATION PAGE
Navigation Page Options
Stop Navigation—cancels navigation. “Grayed out” or
disabled unless you are navigating on a Goto, Track, or
Route.
Bearing Pointer/Course Pointer—toggles between
Bearing (always directed at destination) and Course
(distinctive with dots across center of compass ring,
shows amount of correction needed to be back on
course.). Refer to the image on the previous page for an
example of the compass with the Course Pointer. Refer
to the image below for an example of a compass with a
Bearing Pointer.
Show Data Fields/Big Compass—toggles to display data
fields on the right side of the display or removing the data
fields and showing a larger compass.
Restore
Defaults—returns options and data field choices
to factory designations.
Navigation Page Option Menu
To change data fields:
1. Use the Thumb Stick to highlight the desired data
field and then press it In to display the list of data
options.
2. Select the desired option from the list and press
the Thumb Stick In. The list of data field choices
may be found on page 26 and definitions may be
found in the “Appendix.”